Merged Install/Photo Form

Installation Start/Completion
Which would you like to complete?*

Install Start FormInstall Completion FormAdder Only SubmissionOn Site Homeowner Adder Request
Did you submit the Install Start Form first?*
Be sure to go back and submit the Install Start Form first!!!
For a Sample Report CLICK HERE
BEID #*
***IF BEID# is not present on the calendar invite, input BE0000 EX) John Smith_BE1234, enter BE1234.
Project Address*
Copy from Calendar
Warehouse*
Enter the home warehouse of the job you're completing
Date of work*

MonthDayYear
Date
How many total Installers / trainees are on the job site today? (including yourself)*
Please list any trainees as well in the Technician 1, 2, 3, 4, 5 fields
How many should be receiving credit for the adder work?*
Please list any trainees as well in the Technician 1, 2, 3, 4, 5 fields
Crew Lead*
Technician 1 Name*
Technician 2 Name*
Technician 3 Name*
Technician 4 Name*
Technician 5 Name*
Please Upload a photo of complete Job Hazard Analysis*

(Show Filled OUT JHA FORM)
Cancelof
Please upload a photo of the Vehicle Zone*

(SHOW PROPER CONES SURROUNDING VEHICLES)
Cancelof
Please upload a photo of the Work Zone*

(SHOW EXCLUSION ZONE TAPE, ENTRYWAYS AND HAZARDS MARKED OFF)
Cancelof
Please upload a photo of the Anchor Properly Installed*

(SHOW EXCLUSION ZONE FOR ELECTRICAL WORKING SPACE)
Cancelof
Please upload a photo demonstrating the Fall Protection mechanisms. *

(SHOW ONE PERSON TIED OFF PROPERLY ON ANCHOR WITH HARNESS, ROPE GRAB, LANYARD, AND SHOCK PACK)
Cancelof
Please upload a photo of the Ladder Setup*

(SHOW LADDER SECURED IN ITS SPOT)
Cancelof
Please upload a photo of the Electrical Zone*

(SHOW EXCLUSION ZONE FOR ELECTRICAL WORKING SPACE)
Cancelof
Technician 1 Name- ADDERS*
Technician 2 Name- ADDERS*
Technician 3 Name- ADDERS*
Technician 4 Name- ADDERS*
Technician 5 Name- ADDERS*
Technician 6 Name- ADDERS*
Was the installation completed?*

YesNo - Ran Out of Time or Got DarkNo - Customer CancellationNo - Roof DisqualifiedNo - Unsafe WeatherNo - MPU on Plans Still Needs to Be CompletedNo - MPU NOT on Plans Required for Solar InstallationNo - Equipment IssueNo - Other explain in notes
Was the planset left on site?*

YesNo
Upload a photo of plans on site*

Cancelof
Did the Install deviate from the plan set?*

NoYes
Why did you need to deviate from the planset*
Did your OM approve this layout change?*
CALL YOUR OM IMMEDIATELY
Did the Module Layout Change?*

NoYes
Upload photo of drawing of Layout changes*

Cancelof
Did the One Line Change?*

NoYes
Upload photo of drawing of One Line changes*

Cancelof
Was P_OK with all optimizers communicating, S_OK Cellular and Power is greater than 0 photo completed?*

YesNo
Please provide additional context for your answer:*
Was there any damage done to the homeowner's property or a neighbor's property?*

YesNo
Please upload photos of the damage.

Cancelof
Additional Photo 1

Cancelof
Additional Photo 2

Cancelof
Please provide additional context for your answer:*
Is Grounding Completed? (ground rods, water bonding, etc.)*

YesNo
Please provide additional context for your answer:*
Are all stickers completed?*

YesNo
Please provide additional context for your answer:*
Did you check the meter settings?*

YesNo
Please inform the homeoner that the installation is incomplete and that a representative from the local office will reach out to them to coordinate the completion of the install.
List the adders completed for this project*

System Size Under 4KwGround MountTilt UpRoof Pitch Over 32°Pigeon/ Squirrel MeshThermal Solar RemovalRemove Existing Solar SystemTrenchingConcrete TrenchingAdditional Array (over 4)Out of Region (over 60 miles from warehouse)Battery InstallAttic Run / Crawl SpaceInverter in GarageLoad ControllerNONE
Did you ensure no breakers are tripped?*
Did you ensure all power is on and working?*
Did you walk the job for cleanliness, tools, trash etc?*
How did you tie in?*
How many inverters are there?*
List the adder(s) that have been requested by HO on site that are not contained on the Design

SubpanelEV ChargerAttic Run / Crawl SpacePigeon/ Squirrel MeshInverter in Garage
List the adders completed for this project (ADDER ONLY SUBMISSION)*

MPUSubpanelEV ChargerMain Breaker DerateLoad ControllerAttic Run / Crawl SpaceTrenchingConcrete TrenchingInverter in GarageBattery InstallPigeon/ Squirrel Mesh
How Many Total Arrays were Installed?*
How many Feet of trenching?*
Were there adders not specified?*

YesNo
Module Serial Number Label*

Cancelof
Tape Measure Between Feet*

Cancelof
Racking Attachments Showing Sealant is Present*

Cancelof
L Foot Connection to Rail*

Cancelof
Rail Splices Installed*

Cancelof
Ground and Bonding - On the ROOF*

Cancelof
Optimizer Type Serial Number*

Cancelof
Optimizer Mounted and Wired*

Cancelof
One Array All Installed EXCEPT for Modules showing full racking layout*

Cancelof
Conduit Penetration - showing sealant applied (underneath of flashing)*

Cancelof
Conduit Penetration - from roof fully installed*

Cancelof
Conduit Penetration - from ground fully installed*

Cancelof
Conduit Run Photo 1*

Cancelof
Conduit Run Photo 2*

Cancelof
Conduit Run Photo 3*

Cancelof
Conduit Support Fully Installed*

Cancelof
Conduit Support Showing Sealant Applied Underneath*

Cancelof
Junction Box Showing Weep Hole*

Cancelof
Junction Box Fully Installed - OPEN*

Cancelof
Junction Box Fully Installed - CLOSED*

Cancelof
Clear Photo of Main Breaker Rating*

Cancelof
Clear Photo of Main Panel Label*

Cancelof
Clear Photo of SubPanel Label*

Cancelof
Point of Interconnection*

Cancelof
Pullback of Panel where you tied in with Deadfront OFF*

Cancelof
Breaker/Fuse Rating Legible*

Cancelof
Grounding and Bonding - In the Disco*

Cancelof
AC Disco - OPEN*

Cancelof
AC Disco - CLOSED AND LABELED*

Cancelof
Grounding and Bonding - On the Ground (ground rod)*

Cancelof
Multimeter VOC String 1*

Cancelof
Multimeter VOC String 2*

Cancelof
Multimeter VOC String 3*

Cancelof
Inverter 1 Fully Wired - OPEN*

Cancelof
Inverter 1 Fully Installed - CLOSED AND LABELED*

Cancelof
Inverter 1 Nameplate - showing type and serial number*

Cancelof
Inverter 2 Fully Wired - OPEN*

Cancelof
Inverter 2 Fully Installed - CLOSED AND LABELED*

Cancelof
Inverter 2 Nameplate - showing type and serial number*

Cancelof
Inverter 3 Fully Wired - OPEN*

Cancelof
Inverter 3 Fully Installed - CLOSED AND LABELED*

Cancelof
Inverter 3 Nameplate - showing type and serial number*

Cancelof
Mid Clamp*

Cancelof
End Clamp*

Cancelof
Rail Cut*

Cancelof
Tape Showing Height of Array from Roof*

Cancelof
Racking Wire Management*

Under Array AFTER Glass is Laid
Cancelof
Array 1 Fully Installed*

Cancelof
Array Tilt 1*

Cancelof
Array 2 Fully Installed*

Cancelof
Array Tilt 2*

Cancelof
Array 3 Fully Installed*

Cancelof
Array Tilt 3*

Cancelof
Array 4 Fully Installed*

Cancelof
Array Tilt 4*

Cancelof
Array 5 Fully Installed*

Cancelof
Array Tilt 5*

Cancelof
Array 6 Fully Installed*

Cancelof
Array Tilt 6*

Cancelof
Array 7 Fully Installed*

Cancelof
Array Tilt 7*

Cancelof
Array 8 Fully Installed*

Cancelof
Array Tilt 8*

Cancelof
Array 9 Fully Installed*

Cancelof
Array Tilt 9*

Cancelof
Array 10 Fully Installed*

Cancelof
Array Tilt 10*

Cancelof
Array Map WITH Stringing*

Cancelof
Hardware wall fully installed AND Labeled*

Cancelof
S/OK P/OK Inverter 1 in Production Mode*

Cancelof
S/OK P/OK Inverter 2 in Production Mode*

Cancelof
S/OK P/OK Inverter 3 in Production Mode*

Cancelof
SE Inverter 1 Meter Settings*

Cancelof
SE Inverter 2 Meter Settings*

Cancelof
SE Inverter 3 Meter Settings*

Cancelof
AIF Settings Inverter 1*

Cancelof
AIF Settings Inverter 2*

Cancelof
AIF Settings Inverter 3*

Cancelof
Additional Notes?
Notes on any Missing Photos
Any feedback for the design team?

YesNo
Feedback for Design Team*
Should be Empty:

Installation Start/Completion